Replacing a hard drive – HP ENVY m4-1002xx Notebook PC User Manual
Page 69
●
Do not type on the keyboard or move the computer while an optical drive is writing to a disc. The
write process is sensitive to vibration.
●
Before you move a computer that is connected to an external hard drive, initiate Sleep and allow
the screen to clear, or properly disconnect the external hard drive.
Replacing a hard drive
CAUTION:
Drives are fragile computer components that must be handled with care. Do not drop a
drive, place items on it, or expose it to liquids, or temperature or humidity extremes. See
for specific precautions when handling drives.
CAUTION:
To prevent information loss or an unresponsive system:
Before removing or installing a drive, shut down the computer. If you are unsure whether the
computer is off or in the Sleep state, turn the computer on, and then shut it down through the
operating system.
1.
Save your work and shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Unplug the power cord from the AC outlet.
4.
Turn the computer upside down on a flat surface.
5.
Remove the battery from the computer. See
Removing a user-replaceable battery on page 43
.
Remove the hard drive:
1.
Loosen the hard drive cover screw (1), and then slide the hard drive cover release latch (2) to
release the cover.
2.
Slide the hard drive cover (3) forward, and then lift up and remove the cover (4).
3.
Using the cable tab (1), carefully lift up and disconnect the hard drive cable from the computer,
and then pull the cable out from the routing clips (2).
Improving performance
59