HP StorageWorks 2.32 Edge Switch - Manual (Page 97)

Configuring SAN Products and Fabrics
97 HA-Fabric Manager User Guide
■ Password: User password
Example
...ElementManagerStandAlone -s 172.16.9.10 -p 172.16.9.211 -u
Administrator -pw password
4. Save and close the file.
5. Run the script by double-clicking the file or entering the script name at a DOS
prompt.
6. In case of errors, verify that the appliance is on and that the switch or director
you are trying to access is being discovered.
Searching for Products in a SAN
You can search a discovered SAN for a specific product by its properties, such as
name or IP address.
1. Enter the search parameter in the Search field on the toolbar, as shown in
Figure 42 .
Figure 42: Search Box
2. Click the up or down arrow to search forwards or backwards through the
Physical Map.
3. Click Search to find each product.
Note: When the application finds a product on the Physical Map, it highlights the
product on the Physical Map as well as on the Product List.
Changing Product Properties
You can change some of the properties for online products.