HP StorageWorks 2.32 Edge Switch - Manual (Page 39)

Introduction and General Information
39 HA-Fabric Manager User Guide
Minimap
The Minimap as shown in Figure 8 , is located in the lower right-hand corner of
the main window. The Minimap is useful for getting a bird’s-eye view of the
SAN, or to quickly jump to a specific place on the Physical Map. To jump to a
specific location on the Physical Map, click that area on the Minimap. A close-up
view of the selected location is displayed on the Physical Map.
Use the Minimap to view the entire SAN and to navigate more detailed map
views. This feature is especially useful if you have a large SAN.
Figure 8: Minimap
Floating the Minimap
To float the Minimap and view it in a separate window, click the Detach button
(
) in the upper right-hand corner of the Minimap.
Anchoring the Minimap
To return the Minimap to its original location on the main window, do one of the
following:
■ Click the Attach button ( ) in the upper right-hand corner of the Minimap.
■ Click the Close button ( ) in the upper right-hand corner of the Minimap.
■ Click the logo in the upper left-hand corner of the Minimap and choose Close,
or ALT+F4.
Resizing the Minimap
On an anchored Minimap, place the cursor on the left border of the Minimap until
a double-pointed arrow displays. Click and drag the adjoining divider.
On a floating Minimap, place the cursor on a border of the Minimap until a
double-pointed arrow displays. Click and drag to change the window size.