HP StorageWorks 2.32 Edge Switch - Manual (Page 226)

Troubleshooting
226 HA-Fabric Manager User Guide
Problems with Addresses
Table 18 describes possible problems with addresses and suggested resolutions.
Table 18: Address Problems and Resolutions
Problem Resolution
No subnets or addresses
selected.
1. Choose Discover > Setup.
2. Click on the subnet or individual address you
would like to discover in the Available
Addresses pane.
3. Click the button to move your choice to the
Selected Subnets pane, or to the Selected
Individual Addresses pane.
4. Click OK.
Wrong IP addresses
selected.
1. Choose Discover > Setup.
2. Verify that the IP addresses in the Selected
Subnets and Selected Individual Addresses
panes are the correct current addresses for the
SAN.
3. Click OK.
Wrong community strings
are selected.
1. Choose Discover > Setup.
2. Select an IP address.
3. Click Change.
4. Select the desired community strings.
5. Click OK.