HP StorageWorks 2.32 Edge Switch - Manual (Page 225)

Troubleshooting
225 HA-Fabric Manager User Guide
Problems with Products
Table 17 describes possible product problems and suggested resolutions.
Table 17: Product Problems and Resolutions
Problem Resolution
HBAs not connected to SAN. Check your physical cables and connectors.
Switches not connected to
Ethernet.
Check your physical cables and connectors.
Switches not connected to
SAN.
Check your physical cables and connectors.
Cannot disable Fabric
Binding while Enterprise
Fabric Mode is active.
You may have attempted to disable Fabric Binding
through the Fabric Binding dialog box while
Enterprise Fabric Mode was enabled. Disable the
Enterprise Fabric Mode through the Enterprise
Fabric Mode dialog box before disabling Fabric
Binding.