HP StorageWorks 2.32 Edge Switch - Manual (Page 209)

Configuring Zoning
209 HA-Fabric Manager User Guide
Comparing Zone Sets
You can compare zone sets against one another. Follow these instructions:
1. Choose Configure > Zoning. The Zoning dialog box displays, as shown in
Figure 101 on page 192.
2. Choose a fabric from the Fabric drop-down list. This sets the fabric to target
all zoning actions.
3. Click the Activate Zone Set tab.
4. Click Compare With. The Select a Zone Set dialog box displays.
5. Choose a zone set and click OK. A message displays the comparison results.