Deleting a zone set, Viewing properties for zones and zone sets – HP StorageWorks 2.32 Edge Switch User Manual
Page 206
Configuring Zoning
206
Note:
The zone is deleted without confirmation. If you delete something in error, click
Cancel to restore it.
5. Click OK.
Deleting a Zone Set
1. Choose Configure > Zoning. The Zoning dialog box displays, as shown in
2. Choose a fabric from the Fabric drop-down list. This sets the fabric to target
all zoning actions.
3. Click the Zone Library tab.
4. Right-click a zone set in the Zone Sets list and choose Delete.
Note:
The zone set is deleted without confirmation. If you delete something in error,
click Cancel to restore it.
5. Click OK.
Viewing Properties for Zones and Zone Sets
You can view information for zones and zone sets such as name; number of zones,
zone sets, or zone members; number of unique zone members; and status.
1. Choose Configure > Zoning. The Zoning dialog box displays, as shown in
2. Choose a fabric from the Fabric drop-down list. This sets the fabric to target
all zoning actions.
3. Click the Zone Library tab.
4. Right-click a zone or zone set in the Zones or Zone Sets list and choose
Properties.
5. Click Close after you have viewed the properties.