HP StorageWorks 2.32 Edge Switch - Manual (Page 203)

Configuring Zoning
203 HA-Fabric Manager User Guide
Zoning Administration
This chapter provides instructions for performing administrative functions with
zoning. You can rename, duplicate, delete, and perform other tasks on zones and
zone sets.
Renaming a Zone
1. Choose Configure > Zoning. The Zoning dialog box displays, as shown in
Figure 101 on page 192.
2. Choose a fabric from the Fabric drop-down list. This sets the fabric to target
all zoning actions.
3. Click the Zone Library tab.
4. Right-click a zone in the Zones list and choose Rename.
5. Enter the new name for the zone. See “ Zoning Naming Conventions ” on
page 275 for naming conventions.
6. Press Enter to save the new name.
Renaming a Zone Set
1. Choose Configure > Zoning. The Zoning dialog box displays, as shown in
Figure 101 on page 192.
2. Choose a fabric from the Fabric drop-down list. This sets the fabric to target
all zoning actions.
3. Click the Zone Library tab.
4. Right-click a zone set in the Zone Sets list and choose Rename.
5. Enter the new name for the zone set. See “ Zoning Naming Conventions ” on
page 275 for naming conventions.
6. Press Enter to save the new name.