HP StorageWorks 2.32 Edge Switch - Manual (Page 184)

Optional Features
184 HA-Fabric Manager User Guide
— PortNumber—Port number on a device
— ZoneName—Zone name
— F_Port, FL_Port, TL_Port, E_Port, NL_Port, N_Port, H_Port,
UNKNOWN_PORT—Various types of ports
— MAXPORTS—Max ports for a device
— Operator Types
— =
— <
— <=
— >
— >=
Setting Planning Rules
Note: You must have Administrator privileges to set planning rules.
Use planning rules to specify criteria for a plan evaluation. Rules are stored in the
text file
\Server\Config\Other\rules.dat and
can only be edited or added through this file. You can open the rules.dat file using
any text editor. Be sure to follow appropriate rule syntax when editing the file. See
“
Planning Rules Syntax and Format—Planning rules must follow a certain syntax
and format. See Table 10 for descriptions of planning rule parameters. ” on
page 180 for syntax information.
1. Choose View > Planned SAN. The Planning window displays.
2. Choose Plan > Set Rules. The Planning Rules dialog box displays, as shown
in Figure 99 .