HP StorageWorks 2.32 Edge Switch - Manual (Page 120)

Monitoring SAN Products
120 HA-Fabric Manager User Guide
4. Click OK. A message may display.
5. Click OK.
6. Continue to “ Part 2: Enabling Call Home Notifications ” on page 120.
Part 2: Enabling Call Home Notifications
1. Choose Monitor > Event Notification > Call Home. The Call Home Event
Notification dialog box displays, as shown in Figure 64 .
Figure 64: Call Home Event Notification dialog box
2. Choose Enable Call Home Event Notification to enable call home
notification.
3. Click Send Test to test the call home function.
A fake event is sent to the service center and you are asked to verify that the
service center received the notification. If the server was not found, verify that
the server address was entered correctly and that the server is running.
4. Click OK.
To verify call home settings, click the Call Home icon ( ) on the Status Bar.
Enabling Ethernet Events
An Ethernet event occurs when the Ethernet link between the appliance and the
managed product is lost. You can configure the application to send notification of
Ethernet events.
1. Choose Monitor > Ethernet Event. The Configure Ethernet Event dialog
box displays, as shown in Figure 65 .
Figure 65: Configure Ethernet Event dialog box
2. Choose Enable Ethernet Event to be notified when the Ethernet link
between the appliance and the managed product is lost.