HP StorageWorks 2.32 Edge Switch - Manual (Page 104)

Configuring SAN Products and Fabrics
104 HA-Fabric Manager User Guide
Setting Enterprise Fabric Mode
To enable or disable Enterprise Fabric Mode for a fabric, perform the following:
1. Choose Configure > Enterprise Fabric Mode. The Enterprise Fabric Mode
dialog box displays, as shown in Figure 48 .
Figure 48: Enterprise Fabric Mode dialog box
2. Choose the fabric for which you want to configure Enterprise Fabric Mode
from the Fabric Name drop-down list.
3. The fabric’s current status displays in the Enterprise Fabric Mode field.
4. To activate Enterprise Fabric Mode on the selected fabric, click Activate.
To deactivate Enterprise Fabric Mode on the selected fabric, click
Deactivate.
Note: You must be managing the fabric in order to deactivate Enterprise Fabric
Mode.