HP Designjet 3D Printer series - Manual (Page 13)

Cleaning Models 9
Cleaning tank level
Based on the model lid position, select either a full (upper lid position) or half (lower lid position)
cleaning tank level by pressing the cleaning tank level button. A full cleaning tank level is
approximately 15.14 L (4 gals.) and a half cleaning tank level is approximately 7.57 L (2 gals).
Cleaning agent bag(s)
Select the number of cleaning agent bag(s) to be used based on Table 1 below.
Table 1 Cleaning Tank Level and Cleaning Agent Bags
Add cleaning agent bag
Follow the instructions below for adding the contents of the cleaning agent bag(s) to the
cleaning agent receptacle.
1. Dry hands before opening the cleaning agent bag.
2. Open the cleaning agent bag as shown.
Cleaning Tank Level Cleaning Agent Bag
Half cleaning tank level 1 cleaning agent bag
Full cleaning tank level 2 cleaning agent bags
NOTE : Do not use more than the specified amount of cleaning agent bags. Doing so will
exceed pH levels for wastewater disposal.
Oper
ati
on