Asus LS99 - Manual (Page 21)

Chapter 4 Installing SCSI Drivers 21
4
. Driver
Installation
4
Installing SCSI
Drivers
4.1 Windows 95/98
To install Windows 98 from your CD-ROM drive, you will need to update the
Windows 95/98 startup disk that came with your Windows 98 CD. You need to do
this on a system that has DOS, Windows 95, or Windows 98 already installed.
1. Create a Windows 95/98 Startup disk if one is not provided with your Windows
95/98 CD.
2. Copy aspi8u2.sys and aspicd.sys from the ASUS support CD to the Windows
95/98 Startup disk.
Fresh Windows 95/98 Installation From Floppy Disk
1. Restart your computer with the startup disk in the floppy disk drive.
2. When the Windows 95/98 Startup menu is displayed, select Start computer
with CD-ROM support and press .
3. Insert the Windows 95/98 CD into the CD-ROM drive, switch to your CD-ROM
driver letter and type setup.
Follow the on-screen instructions to continue Windows 95/98 Setup. Setup will
run and restart your computer. If you are given an option, always select 1. Start
Windows 98 Setup from CD-ROM. Windows installation will continue for some
time.
4. When you see the Add New Hardware Wizard screen and PCI SCSI Bus
Controller is displayed, click Next.
5. Select Search for best driver, then click Next.
6. Select Specify a location and type:
e:\SCSI\win95 or e:\SCSI\win98 in the space provided. Insert the ASUS support
CD. Click Next.
7. When you see the Adaptec Ultra160 PCI SCSI Controller click Next.
8. When you see the following message:
Windows has finished installing the software that your new hardware device
requires. Click Finish.
9. If you are prompted to reboot the system, select No if you have a dual-channel
adapter or if you have multiple Ultra160 adapters. Then repeat Steps 5 through 9
for each SCSI channel until all Ultra160 adapters are found. Otherwise, select
Yes to reboot the system.
10. Follow the on-screen instruction to complete the Windows 98 installation.
NOTE: Refer to the Ultra160 Family Manager Set User’s Guide (see
ASUS support CD) for more information on installing SCSI drivers.