Asus LS99 - Manual (Page 14)

14 Chapter 3 Configuring the ASUS LS99
3. Configuration
3.2 Configuring Using SCSI Select
SCSISelect, which is included with the ASUS LS99 SCSI Card, enables you to change
SCSI settings without opening the computer or handling the card. SCSISelect also
enables you to low-level format or verify the disk media of your SCSI hard disk
drives. The following table lists the available and default settings for each SCSISelect
option. The settings marked as “Auto-sync” are automatically synchronized for both
SCSI channels—for example, if you change the Boot Channel option to B First on
Channel A, the change will apply to Channel B as well. All other options can be set
separately for each of the two SCSI channels.
The default settings are appropriate for most systems and should not be changed.
Run SCSISelect if you need to change or view current settings, or if you need to use
the SCSI disk utilities.