HP Integrity rx4610 Server - Manual (Page 13)

9
4 Starting the DPC Console
You can start the DPC Console on the client workstation several different ways.
• From a Windows-based operating system you can use Programs Intel Server Control DPC
Console selection from the Start menu.
• From a running ISC Console you can double-click the icon that represents the DPC Console.
• From a shell environment you can use the following command lines:
• DPCConsole /modem=[phonenumber], where [phonenumber] is the phone number of the server.
• DPCConsole /direct= [comX], where [comX] is the COM port of the client workstation direct
connection.
• DPCConsole /lan=[ipaddress or dnsname], where [ipaddress or dnsname] is the IP Address DNS Name
of the server.
• From a supported Enterprise System Management Console (ESMC) you can click the DPC Console
icon in the manager’s tool.