HP StorageWorks 2.32 Edge Switch - Manual (Page 51)

HA-Fabric Manager user guide 51
7. If you do not want to change the description of any firmware versions and do not want to delete
any firmware files, go to step 10.
8. Change the description:
a. If you want to change the description of any of the firmware versions, select the firmware
version in the Firmware Library table, and click Modify. The Edit Firmware Description
dialog box appears.
b. Enter a new Description for the firmware, and then click OK.
9. If you do not want to delete a firmware file, go to step 10.
10. Delete a firmware file:
a. If you want to delete any firmware files, select the firmware version in the Firmware Library
table, and click Delete.
b. At the confirmation prompt, click Yes to confirm deletion of the selected firmware file.
11. Select the firmware version you want to install in the Firmware Library table.
12. Click Next to advance to the Execution Options tab, or select the Execution Options tab.
Selecting execution options
When you select execution options, you can choose to pause the firmware installation or halt the
data collection in the event of an error when the firmware installation runs.
To pause before each action, or halt on error during the firmware installation:
1. Click Next or select the Execution Options tab to display the Select Execution Options dialog
box ( Figure 15 ).
Figure 15 Select Execution Options dialog box