HP StorageWorks 2.32 Edge Switch - Manual (Page 39)

HA-Fabric Manager user guide 39
The network address you entered remains in the Network Address list for future logins. If you fail to
connect to the appliance, the HAFM window is not displayed and the network address does not
remain in the list.
Figure 8 HAFM window
Accessing the HAFM application remotely
Users at remote PCs can access the HAFM application and Element Managers loaded on the
appliance if the following criteria are met:
• The remote workstation meets minimum hardware and software requirements (see ” Configuring
remote workstations ” on page 261).
• The HAFM client application is running. If you need to install the HAFM client application, see
” Configuring remote workstations ” on page 261.
• The remote system is configured to connect with the HAFM appliance over a TCP/IP network
connection.
• No more than seven other remote users are currently logged in to the HAFM application.
Operators at remote workstations can manage and monitor all products controlled by the HAFM
appliance. Each active connection between a remote workstation and an HAFM appliance and
managed product is called a session.
To access the HAFM appliance from a remote workstation, perform the following: