HP StorageWorks 2.32 Edge Switch - Manual (Page 277)

HA-Fabric Manager user guide 277
Performance event properties
Performance events occur when the performance at a switch port crosses a user-defined threshold.
Table 40 describes the event properties.
Table 41 describes the properties of a device in the SAN.
OS Name Operating system name
OS Version Operating system version
Server Name Name of the appliance
Subnet Mask Discovered subnet mask
Total Memory Total physical memory
Trap Forwarding Off Specifies whether trap forwarding is enabled
Region Region of the world where the user is located
Time Zone User’s time zone
User Count Number of users
Table 39 SNMP trap system properties (continued)
Property Description
Table 40 Performance event properties
Property Description
Threshold Type Performance threshold type (for example, high critical)
Measure Type Performance measurement units
Port Number Port number that encountered an event
IP Address IP address of the device that encountered an event
Source Label of the device where the event occurred
Node Name WWN of the device that encountered an event
Port Name WWN of the port that encountered an event
Description Description of the performance event
Event Level Severity level
Table 41 Performance device properties
Property Description
Label Device’s label, as shown on the Physical Map
Name Device’s name, as specified in the Properties dialog box
Device Type Type of device (for example, HBA)
Node Name Device’s WWN
IP Address Device’s IP address
Vendor Device’s vendor