Figure 127 switch on topology showing ports, Event management, Event trigger properties – HP StorageWorks 2.32 Edge Switch User Manual
Page 275: Snmp trap event properties, Table 37 snmp trap event properties (continued), 127 switch on topology showing ports, 37 snmp trap event properties
HA-Fabric Manager user guide 275
NOTE:
In
, gray lines on the HBA indicate no activity on those connections.
Figure 126
Connection performance as displayed on Physical Map
Figure 127
Switch on topology showing ports
Event Management
Event Management enables you to specify triggers and actions to automate tasks. For example, you
can set an event trigger to fire at a certain time and day (everyday at noon) and associate the
action of sending an e-mail message.
Event trigger properties
This section describes the properties you can set for event triggers.
SNMP trap event properties
SNMP trap events occur when the appliance receives an SNMP trap.
describes trap event properties.
Table 37
SNMP trap event properties
Property
Description
IP Address
Device’s IP address
Node Name
Device’s WWN
Port Name
Port’s WWN