HP StorageWorks 2.32 Edge Switch - Manual (Page 181)

HA-Fabric Manager user guide 181
Using the Security Change Confirmation and Status dialog box
Clicking OK on the Apply to Other Products dialog box or clicking Apply on the Users tab, displays
the Security Change Confirmation and Status dialog box ( Figure 111 ). This is a status-monitoring
dialog box that lets you know if the changes were successful.
Figure 111 Security Change Confirmation and Status dialog box
The Security Change Confirmation and Status dialog box lists the ID of the user ID who initiated the
changes, the time that the changes were scheduled, the ID of the server from which the changes
are populated, and the affected switches and directors. The server ID is the server name plus the IP
address.
The Detailed Changes table lists all configurations that the Security Administrator made on the
Users tab. The columns of this table vary depending on which tab the Security Administrator is
accessing the confirmation information.
If there is only one product to which changes must be applied, only that product is listed. The
product ID is its node name. By default, this product is highlighted.
If you applied the same user settings to multiple products, the Product List displays the product
names that were selected in the Apply To dialog box. By default, the product that was selected
from the top table for configuration is highlighted. The content of the Detailed Changes table
changes as you scroll through products in the Product List.