Figure 71 select template dialog box, Viewing reports, 71 select template dialog box – HP StorageWorks 2.32 Edge Switch User Manual
Page 119
HA-Fabric Manager user guide 119
To generate a report:
1.
Select Monitor > Reports > Generate.
The Select Template dialog box is displayed (
).
Figure 71
Select Template dialog box
NOTE:
You can generate a report of the Physical Map by clicking Generate Reports (or pressing
Ctrl-G) on the right-hand toolbox while viewing a discovered SAN.
2.
Select the type(s) of reports you want to generate.
3.
Click OK.
The generated reports are automatically displayed in the Reports dialog box.
4.
To print the report:
a. Click Show in Browser.
The selected report is displayed in your default web browser.
b. Select File > Print in the web browser.
c. Close the web browser and the Reports dialog box.
NOTE:
Hyperlinks in reports are active as long as the source data is available.
Viewing reports
You can view reports through the application or through a web browser. Reports are stored in
Install_Home
\
Server\Reports\
.
1.
Select Monitor > Reports > View.