HP StorageWorks 2.32 Edge Switch - Manual (Page 118)

Monitoring SAN products 118
Enabling Ethernet events
An Ethernet event occurs when the Ethernet link between the appliance and the managed product is
lost.
To enable Ethernet events notification:
1. Select Monitor > Ethernet Event.
The Configure Ethernet Event dialog box is displayed (
Figure 70 ).
Figure 70 Configure Ethernet Event dialog box
2. Select the Enable Ethernet Event check box.
3. Enter the amount of time between the event and the notification in the Ethernet Time Out field.
4. Click OK.
Creating reports
Presenting and archiving data about a SAN is equally as important as gathering the data. Through
the application, you can generate reports about the SAN. You can send the reports to network
administrators, support consultants, and others interested in the SAN’s architecture, or archive them
for future reference.
You can create reports about Performance Data. However, the Performance Module is an optional
feature. Contact your sales representative to purchase this module.
Generating reports
You can generate various SAN report. Generated reports are saved to
Install_Home\Server\Reports\
.