HP ProLiant DL560 Gen8 Server - Manual (Page 52)

Hardware options installation 52
o Single capacitor pack holder
o Double capacitor pack holder
11. Install the access panel (on page 20 ).
12. Install the server into the rack (" Installing the server into the rack " on page 30 ).
13. Connect each power cord to the server.
14. Connect each power cord to the power source.
15. Power up the server (on page 18 ).
Redundant hot-plug power supply option
CAUTION: All power supplies installed in the server must have the same output power capacity.
Verify that all power supplies have the same part number and label color. The system becomes
unstable and may shut down when it detects mismatched power supplies.