HP Visualize J210 Workstation - Manual

Hewlett-Packard Company
3404 East Harmony Road
Fort Collins, Colorado 80528
Pub. No. A7853-90011
Read Before Installing
CD-RW Drive for HP-UX Workstations
For a tutorial on creating CD-RW masters on HP-UX systems, refer to the
/opt/OpenSource/cdrtools-1.10/USER_GUIDE.pdf
file on the CD-RW software media.
Supported Features. This product (and associated software) is intended to be used primarily
as a data storage and exchange device. Hewlett-Packard does not support the creation or duplication
of audio CDs using this product and software.
Hardware Installation
The CD-RW drive you have purchased may be installed in any one of several models of HP-UX Work-
stations. For complete instructions on how to install the drive on your system, please refer to the
appropriate Owners Guide, Parts Replacement Guide or Technical Reference for your system. These
documents can be found at:
http://www.hp.com/workstations/support/documentation/
hpux_manuals.html
This CD-RW drive can either be installed to replace an existing CD-ROM drive or as a new drive
where none existed before. It also may have been integrated into your computer at the HP factory.
If you are replacing an existing CD-ROM drive with the CD-RW drive, at minimum you must load the
PHKL_24282 (for HP-UX 11.0) or PHKL_24283 (for HP-UX 11i) patches from the CD-RW software
media. Subsequent patches are recommended in lieu of these minimum required patches. If you are
installing a new drive where none existed before, you must load the patches from the
http://us-support.external.hp.com web site. Make sure these patches are installed on your system
before attempting to install the hardware.
Feature HP Support
Audio CD duplication No (both GUI and command line)
Create bootable HP-UX CD GUI=No, Command line=Yes
Duplicate bootable CD Yes (GUI and command line) if CD is valid
Multi-Session recording No (both GUI and command line)
Copying HP-UX install CD For more information go to USER_GUIDE.pdf on
the CD
Copy CD-to-CD No (both GUI and command line)
Disk-at-once recording No (both GUI and command line)
Track-at-once recording Yes (both GUI and command line)
Data recording (any file type) Yes (both GUI and command line)