Scan from hp smart document scan software, How to copy – HP Scanjet Enterprise Flow N9120 Flatbed Scanner User Manual
Page 12
Scan from HP Smart Document Scan Software
1.
Click Start, point to Programs or All Programs, point to HP, point to HP Smart Document Scan, and then
click HP Smart Document Scan Software.
2.
Select a profile, and then click Scan.
TIP: A description of the selected profile is displayed below the list.
3.
Follow the onscreen instructions to complete the scan.
For more information, see the HP Smart Document Scan Software Help.
Scan from ISIS- or TWAIN-compliant scanning software
1.
Start the scanning software, and then select the ISIS or TWAIN data source.
2.
Select the settings that are appropriate for the documents that you are scanning.
3.
Carry out the appropriate actions to complete the scan.
For more information, see the online help for the scanning software.
How to copy
The basic steps for copying are:
1.
Load the originals.
2.
Do one of the following:
•
Press the Copy (
) button on the scanner front panel to print the copies with the current copy
settings.
•
Click Start, point to Programs or All Programs, point to HP, point to Scanjet, point to N9120, and
then click Document Copy.
Select print settings in the HP Document Copy dialog box.
NOTE: If you want to change the copy settings, start the copy from the HP Document Copy software.
TIP: 1 You can configure HP Document Copy to always prompt for copy settings before starting to
print. For information, see the HP Scanner Tools Utility help.
TIP: 2 If you select duplex scanning or copying and you load the originals into the automatic document
feeder (ADF), the scanner processes both sides of a two-sided original at the same time.
See also
•
•
Associate a quick start button with scanning software
•
Chapter 1
10
Use the scanner