Replacing the computer core in the enclosure – Apple Power Mac G4 Cube (Battery Replacement) User Manual

Page 5

Power Mac G4 Cube Battery -

Replacing the Computer Core in the Enclosure

Holding the core by the latch, insert the core into the computer.

Note:

The core fits into the enclosure only one way. Position the core

so the ports are toward the back of the enclosure.

With a flat hand, press down on the latch until it locks into place. Firmly

press the core to ensure it is fully secured within the enclosure.

Important:

Do not lift or carry your computer by the core latch. The

enclosure could fall off the core and be damaged.

Core

Enclosure

Latch