HP Integrity rx7620 Server - Manual (Page 30)

Figure B-1 Accessing the EFI Environment for an nPartition
Command Reference: EFI Shell Commands
Table B-1 lists the commands supported by the EFI Shell interface on HP Integrity Superdome
servers.
The EFI Shell is accessible from an nPartition console when the nPartition is in an active state
but has not booted an operating system.
The following categories of commands are available:
•
“Boot Commands — EFI Shell” (page 31)
• “Configuration Commands — EFI Shell” (page 31)
• “Device, Driver, and Handle Commands — EFI Shell” (page 31)
• “Filesystem Commands — EFI Shell” (page 32)
• “Memory Commands — EFI Shell” (page 32)
• “Shell Navigation and Other Commands — EFI Shell” (page 33)
• “Shell Script Commands / Programming Constructs — EFI Shell” (page 33)
For details on these commands, enter help command at the EFI shell prompt.
30 Extensible Firmware Interface (EFI)