HP Integrity rx7620 Server - Manual (Page 31)

Table B-1 EFI Shell Command Reference
Description Command
Boot Commands — EFI Shell Commands related to nPartition booting
Set/view autoboot timeout variable autoboot
Display/modify the driver/boot configuration bcfg
Set/view BootTest bits boottest
Boot over the LAN lanboot
Reset the system (nPartition) for reconfiguration; the nPartition remains inactive in the
'shutdown for reconfig' state reconfigreset
Reset the system (nPartition) reset
Connect drivers for bootable devices search
Configuration Commands — EFI Shell Commands for changing and retrieving system (nPartition) information
Set/view ACPI configuration mode acpiconfig
Deconfigure/reconfigure cells (set cell use-on-next-boot values) cellconfig
Deconfigure/reconfigure CPUs cpuconfig
Display the current date or set the date of the system (nPartition) date
Deconfigure/reconfigure memory (DIMMs) dimmconfig
Display/change the error level err
View/clear logs errdump
View FRU data fru
Display hardware information info
Set/view a monarch processor monarch
Make a PAL call palproc
Enable/disable PCI expansion ROM drivers romdrivers
Set/view preferred root cells (set nPartition core cell choices) rootcell
Make a SAL call salproc
Performs TFTP operation to a bootp/DHCP enabled Unix boot server tftp
Display the current time or set the time of the system (nPartition). EFI time is set and
presented in GMT (Greenwich mean time) time
Save/restore specific EFI variables variable
Display the version information ver
Device, Driver, and Handle Commands — EFI Shell Commands for managing devices, drivers, and handles
View serial port com settings baud
Bind a driver to a device connect
Hex dump of BlkIo devices dblk
Display devices managed by EFI drivers devices
Display tree of devices devtree
Dump handle info dh
Command Reference: EFI Shell Commands 31