Avocent Single port KVM over IP switch - Manual (Page 62)

Single port KVM over IP switch
62
NFS Logging enabled
Define a NFS server, where a directory or a static link have to be exported, to write all
logging data to a file that is located there. To write logging data from more than one
IP-KVM switch devices to only one NFS share, you have to define a file name that is
unique for each device. When you change the NFS settings and press the button “Apply” ,
the NFS share will be mounted immediately. That means, the NFS share and the NFS
server must be filled with valid sources or you will get an error message.
SMTP Logging enabled
With this option, the IP-KVM switch is able to send Emails to an address given by the
Email address text field in the Event Log Settings. These mails contain the same
description strings as the internal log file and the mail subject is filled with the event group
of the occurred log event. In order to use this log destination you have to specify a SMTP
server, that has to be reachable from the IP-KVM switch device and that needs no
authentication at all (:).
SNMP Logging enabled
If this is activated, the IP-KVM switch sends a SNMP trap to a specified destination IP
address, every time a log event occurs. If the receiver requires a community string, you
can set it in the appropriate text field. Most of the event traps only contain one descriptive
string with all information about the log event. Only authentication and host power events
have an own trap class that consists of several fields with detailed information about the
occurred event. To receive this SNMP traps, any SNMP trap listener may be used.
Warning
In contrast to the internal log file on the IP-KVM switch, the size of the NFS log file is
not limited. Every log event will be appended to the end of the file so it grows
continuously and you may have to delete it or move it away from time to time.