Avocent Single port KVM over IP switch - Manual (Page 53)

Single port KVM over IP switch
53
Remote Console And HTTPS port
Port number at which the IP-KVM switch's Remote Console server and HTTPS server
are listening. If left empty the default value will be used.
HTTP port
Port number at which the IP-KVM switch's HTTP server is listening. If left empty the
default value will be used.
Telnet port
Port number at which the IP-KVM switch's Telnet server is listening. If left empty the
default value will be used.
Bandwidth limitation
The maximum network traffic generated through the IP-KVM switch ethernet device.
Value in Kbit/s.
Enable Telnet access
Set this option to allow accessing the LARA express using the Telnet
Gateway see the Section called Telnet Console ).
Disable Setup Protocol
Enable this option to exclude the IP-KVM switch from the setup protocol.
6.5.2 Dynamic DNS
Figure 6-20. Dynamic DNS
A freely available Dynamic DNS service (dyndns.org) can be used in the following scenario
(see Figure 6-21):