HP StorageWorks MSA 2.8 SAN Switch - Manual (Page 19)

Remote Switch
19 HP StorageWorks Remote Switch Version 3.1.x/4.1.x User Guide
You must disable the switch prior to entering the configure telnet command.
In the following example, the default value was accepted for R_A_TOV.
switch:admin> configure
Configure...
Fabric parameters (yes, y, no, n): [no] y
Domain: (97..127) [97]
BB credit: (1..27) [16]
R_A_TOV: (4000..120000) [10000]
E_D_TOV: (1000..5000) [2000]
WAN_TOV: (0..2000) [0]
MAX_HOPS: (7..13) [7]
WAN_RTT_DLY_MAX: (0..9500) [200]
Data field size: (256..2112) [2112]
Sequence Level Switching: (0..1) [0]
Disable Device Probing: (0..1) [0]
Suppress Class F Traffic: (0..1) [0]
SYNC IO mode: (0..1) [0]
Core Switch PID Format: (0..1) [1]
Per-frame Route Priority: (0..1) [0]
Long Distance Fabric: (0..1) [0]
Virtual Channel parameters (yes, y, no, n): [no] n
Zoning Operation parameters (yes, y, no, n): [no] n
RSCN Transmission Mode (yes, y, no, n): [no] n
NS Operation Parameters (yes, y, no, n): [no] n
Arbitrated Loop parameters (yes, y, no, n): [no] n
System services (yes, y, no, n): [no] n
Portlog events enable (yes, y, no, n): [no] n
No changes.
switch:admin>