Avaya P332G-ML - Manual (Page 44)

Chapter 6 Avaya P332G-ML Front and Rear Panels
28 Avaya P332G-ML User’s Guide
OPR CPU Operation
OFF – Module is booting
ON – Normal operation
SYS System Status
OFF – Module is a slave in a stack
ON – Module is the master of the stack and
the Octaplane and Redundant (optional)
cable(s) are connected correctly.
This LED will also light in Standalone mode.
Blink – Box is the master of the stack and the
Octaplane is in redundant mode.
ROUT Routing Mode
OFF – Layer 2 mode
ON – Router mode
The following Function LEDs apply to all ports
LNK Port Status
ON – Link is OK
OFF – Port is disabled
Blink – Port is enabled, but Link is down
COL Collision Always OFF. All ports are full-duplex only.
Tx Transmit to line
OFF – No transmit activity
ON – Data transmitted on line from the
module
Rx Receive from line
OFF – No receive activity
ON – Data received from the line into the
module
FDX Full Duplex mode Always ON. All ports are full-duplex only.
Table 6.1 Avaya P332G-ML LED Descriptions (Continued)
LED Name Description LED Status