HP ProLiant DL145 G3 Server - Manual (Page 50)

Troubleshooting 50
o lspci -v
o uname -a
o cat /proc/meminfo
o cat /proc/cpuinfo
o rpm -ga
o dmesg
o lsmod
o ps -ef
o ifconfig -a
o chkconfig -list
o mount
• Contents of the following files:
o /var/log/messages
o /etc/modules.conf or etc/conf.modules
o /etc/lilo.conf or /etc/grub.conf
o /etc/fstab
• If HP drivers are installed:
o Version of the PSP used
o List of drivers from the PSP (/var/log/hppldu.log)
• A list of each third-party hardware component installed, with the firmware revisions
• A list of each third-party software component installed, with the versions
• A detailed description of the problem and any associated error messages
Novell NetWare operating systems
Collect the following information:
• Whether the operating system was factory installed
• Operating system version number
• Printouts or electronic copies (to e-mail to a support technician) of AUTOEXEC.NCF, STARTUP.NCF,
and the system directory
• A list of the modules. Use CONLOG.NLM to identify the modules and to check whether errors occur
when the modules attempt to load.
• A list of any SET parameters that are different from the NetWare default settings
• A list of the drivers and NLM files used on the server, including the names, versions, dates, and sizes
(can be taken directly from the CONFIG.TXT or SURVEY.TXT files)
• If HP drivers are installed:
o Version of the PSP used
o List of drivers from the PSP
• Printouts or electronic copies (to e-mail to a support technician) of:
o SYS:SYSTEM\SYS$LOG.ERR