Using the status tab, Viewing diagnose test status – HP Insight Diagnostics User Manual
Page 22
Using HP Insight Diagnostics 22
o
Unattended runs the tests that do not require user input.
3.
Select the test duration:
o
Loops runs the test for the specified number of test cycles.
o
Total Test Time (minutes) runs the test for the specified length of time.
4.
Click the Stop on First Error checkbox to stop all tests if an error occurs.
5.
Select the device and tests:
o
Click the Check All button to run all device-specific tests.
o
Click the Uncheck All button to clear any check boxes that are selected.
o
Click the Expand button to view the available device-specific tests, and then select the check box
for tests to run.
6.
Click the Begin Testing button.
The Status tab displays test progress. The logs, on the Log tab, display detailed test results.
Using the Status tab
The Status tab displays testing progress and results.
Viewing Diagnose test status
The progress and status of the Diagnose process appears on the Status tab when Diagnose completes.
The progress bar shows the test progress. During tests of longer duration, the Status screen refresh rate
varies.