HP Insight Diagnostics - Manual (Page 19)

Using HP Insight Diagnostics 19
To start a diagnostic test:
1. Click the Diagnose tab.
2. Select the device to diagnose:
o Select All Devices to assess the health of all logical volumes and power supplies.
o Select one or more specific logical volumes or power supplies to assess the health of the selected
devices.
3. Click the Diagnose button.
If the computer does not have any logical volumes or power supplies that are diagnosable, the following
message appears:
System does not have any diagnosable devices installed.
Using the Test tab (HP Insight Diagnostics Offline
Edition only)
IMPORTANT: This feature is only available in HP Insight Diagnostics Offline Edition.