Assembling quick attach device, Assembling quick attach device -7, Assembly – Alamo RHINO 2409 User Manual

Page 43: Assembl y

Text mode
Original mode

ASSEMBLY

2409 01/11

Assembly Section 3-7

ASSEMBL

Assembling Quick Attach Device

Quick attach device can be installed using tools ordinarily available.

Torque all hardware to specifications listed in loader operator’s manual.

Shut off the tractor engine and engage the tractor brakes during installation.

Only quick attach, skid steer compatible attachments can be used with the quick attach device. Pin on style
attachments can be used on the loader, but necessitate removal of the quick attach device and relocation of
the bucket level indicator.

All references to left and right used in these instructions are as they would appear to the operator standing at
the rear of the unit facing forward.

1. Quick attach device is pre-assembled at the factory.
2. Unband the quick attach device and wood blocks. (Figure Asm-L-0012)