Audiovox FPE1078 - Manual (Page 13)

13
G. Applying Power to the Unit
a. Using AC adaptor
Connect the supplied AC adaptor.
• Use the unit only the supplied AC adaptor.
Use with non supplied AC adaptors may damage the unit.
• Do not touch the AC adaptor with wet hands. Doing so is dangerous which
could result in an electric shock.
• Do not use with a voltage other than the voltages displayed. Improper voltage
could cause fire, electrical shock, or damage.
b. Using the vehicle DC power adaptor
Connect the supplied DC power
adaptor to vehicle power outlet.
Caution using the vehicle DC power adaptor:
• Use only the supplied DC power adaptor. Using other DC power adaptors
could damage the unit.
• After use, disconnect the DC power adaptor plug from the unit and
the vehicle power socket.
• The DC power adaptor may cause interference with reception from the car
radio or another radio inside the vehicle. If this is the case, disconnect the
DC power adaptor from the vehicle power socket, or use the radio located at a
further distance from the vehicle power socket.
AC adaptor
INPUT: AC 100 ~ 240V, 50/60Hz, 0.7A
OUTPUT: DC 12V, 1.5A
a
b
Vehicle DC Power Adapter
INPUT: DC 12-16V
OUTPUT: DC 12-16V