Aquacal 110 - Manual (Page 6)

6
Corrosion-Proof Cabinet
The cabinet, being made from resilient, UV-Protected ABS material, has superior fade
resistance and can never rust or corrode. You can expect the cabinet to retain a like-
new appearance with only an occasional wash down and—if so desired—a quick waxing.
PLEASE READ FURTHER TO BECOME FAMILIAR WITH ALL THE FEATURES, THE SAFE
OPERATION, AND THE CARE OF YOUR NEW HEAT PUMP.
Important Features of Your
New Heat Pump
Heat & Cool Capability
*
Puts you in full control, year round... Warms your pool or spa with the reliability and
efficiency of our other heat pumps, but, with the flip of a switch, can also cool your pool
or spa to refreshing temperatures during hot summer months. For cooler climates,
Heat & Cool heat pumps offer unique advantages over passive defrost models. Please
read more below...
Hot Gas Defrost
*
Hot gas defrost heat pumps are uniquely equipped for an active defrost cycle. Active
defrost involves directing hot refrigerant vapor to the heat collector, melting accumulat-
ed ice away in a matter of a few minutes... then right back to heating. Standard defrost
heat pumps may remain “off in defrost” for extended periods during very cold weather.
Because of their ability to continue to operate–even during freezing weather–hot gas
defrost models extend the swimming season longer than any standard-defrost heat
pump.
Scroll Compressor
50% fewer moving parts than standard piston-type compressors. This equates to much
improved reliability and improved efficiency. Scroll compressors are also much quieter in
operation than their piston-type counterparts. And, while all AquuaCal heat pumps are
known for their low operating noise levels, if yours is a
SuperQuiet TM model, it’s very
likely your heat pump will be quieter than any other item on the pool equipment pad.
* These features available in Icebreaker ® and SuperQuiet TM Models Only.
ThermoLink ® Heat Exchanger
The heart of your heat pump is the patented ThermoLink ® heat exchanger. One of the
primary causes of premature heat pump demise is the failure of the heat exchanger.
Ordinary heat exchangers are made from a cupronickel alloy. This cupronickel material is
susceptible to attack from the sanitizers used in pools and spas and from other related
water chemistry conditions. Once the heat exchanger fails, the heat pump is ruined. The
ThermoLink
® heat exchanger tube is made from titanium, and is virtually impervious to
water chemistry damage.
Digital Controller
Digitally-based microprocessor controls water temperature to within 1º Fahrenheit of
set point. Controller also permits user to predefine different pool and spa water temper-
atures, and to prevent tampering by locking out controls via a pass code.