Asus A7V133 - Manual (Page 20)

ASUS A7V133 User’s Manual
3. HARDWARE SETUP
3. H/W SETUP
Motherboard Settings
4) PCI 3Volt Setting (3VSBSLT)
This jumper allows you to select the voltage supplied to PCI devices. If you
have PCI devices that require auxiliary power, set this jumper to 3 VSB.
Setting 3VSBSLT
3 Volt [1-2]
3 VSB [2-3] (default)
01 01 01
A7V133
A7V133 PCI 3Volt Selection
Add 3 Volt Add 3 VSB
(Default)
1 2 2 3
3VSBSLT
01 01 01
A7V133
A7V133 ATA100/RAID0 Selection
RAID0 ATA100
3 2 2 1
JP13
JP14
5) ATA100 / RAID 0 Setting (ATA100/RAID 0) (Optional)
Jumper 13 and 14 allow you to select the ATA100 IDE protocol or the RAID 0
protocol and so, specify the function of the Promise IDE controller. More infor-
mation is available on the Support CD and in Section 5.4 of Software Setup:
Using the Promise Chip for RAID 0.)
The default setting is ATA100: [1-2].
Setting ATA100/RAID 0
ATA100 Jumper 13 [1-2] (default)
Jumper 14 [1-2] (default)
RAID 0 Jumper 13 [2-3]
Jumper 14 [2-3]
(Default)