Audiovox Rampage ACD88 - Manual (Page 15)

CD CHCD CHCD CHCD CHCD CH
AAAAA
NGER CONTRNGER CONTRNGER CONTRNGER CONTRNGER CONTR
OLOLOLOLOL
S / CD CHS / CD CHS / CD CHS / CD CHS / CD CH
AAAAA
NGER ERRNGER ERRNGER ERRNGER ERRNGER ERR
OR CODESOR CODESOR CODESOR CODESOR CODES
15 15 15 15 15
du du du du du
DISC/TRACK REPEAT PLAY (RPT)
When the RPT button is pressed, the RPT
indication will appear on the display panel
and play of the selected track will be
continually repeated until the Track Repeat
mode is canceled by pressing the RPT
button twice or by activating the Scan or
Shuffle Play functions.
When the Repeat button is pressed twice
the DRT indication will appear on the display
panel and play of the selected disc will be
continually repeated until the Disc Repeat
mode is canceled by pressing the RPT
button again or by activating the Scan or
Shuffle Play
functions.
el el el el el
DISC/TRACK SHUFFLE PLAY (SHF)
When the SHF button is pressed, the SHF
indication will appear on the display panel
and the tracks on the disc will be played in a
random, shuffled order. The Track Select
button will also select tracks in the shuffled
order instead of the normal progression. The
Shuffle Track mode can be canceled by
pressing the SHF button or by activating the
Scan or Repeat Play functions.
When the SHF button is pressed and held,
the DSF indication will appear on the display
panel and the discs in the magazine will be
played in a random, shuffled order, as well
as the tracks on each disc. After playing all
tracks selected at random from a disc in
the magazine, the unit will select another
disc at random and play all the tracks on it
in a random shuffled order. This will continue
from disc-to-disc until the Random Disc
mode is canceled by pressing the SHF
button again or by activating the Scan or
Repeat Play functions.
If a problem should develop while operating the CD changer, the following error codes may
appear on the display panel.
ER-1: Indicates that there is no magazine loaded in the CD changer.
ER-2: Indicates a problem with the magazine eject function.
ER-3: Indicates an error in the disc loading function.
ER-4: Indicates an error in the disc un-loading function.
ER-5: Indicates an error in the magazine position.
ER-6: Indicates an error in the laser pick-up position.
ER-7: Indicates an error in the laser focus on the disc.
In any of the above situations, try ejecting the CD magazine from the changer and make
sure the discs are clean, undamaged, and loaded correctly (refer to the Owner’s Manual
of the CD changer). Re-load the magazine and check for proper operation. You may also
try activating the RESET button
dm
on the unit, but this will also erase the time and pre-set
memories.
If the suggested measures do not solve the problem, contact an approved warranty station
near you for further assistance.
CD CH CD CH CD CH CD CH CD CHA A A A ANGER ERR NGER ERR NGER ERR NGER ERR NGER ERROR CODES OR CODES OR CODES OR CODES OR CODES