Avocent ESP Multi-Interface Serial Hub SuperSerial - Manual (Page 16)

16
Equinox ESP Multi-Interface Serial Hub Product Installation Guide
2.7.4 Creating and Using AIX ESP Installation Diskettes on
Microsoft Windows
1. Load the Equinox SuperSerial Software CD.
• If you have autoplay enabled, the Equinox SuperSerial Software
Installation screen will appear.
• If you do not have autoplay enabled, set your default drive to
D: and run the command D:\SETUP, where D: is your CD-ROM
drive letter.
2. Click UNIX on the Main Window.
3. Select the UNIX operating system for which you need drivers. Follow
the on-screen instructions for creating an installation diskette.
4. Once the AIX installation diskette is created, refer to the
following les for detailed installation instructions:
/drivers/esp/aix43/readme.txt
/drivers/esp/aix51/readme.txt