Turning on the projector, Turning off the projector, Focus and position of the screen image – LG HS201 User Manual

Page 14: Selecting input mode, Input list

Installing and Composition

Selecting input mode

1. Press the

INPUT button on the top cover or the INPUT button on the remote control.

2. Selecting an input signal with the

INPUT button will only change the projector only to connected inputs. You can

change it to any inputs with the ＜, ＞ button.

• The component input is always active, and it does not support plug &play function.

Input List

Component

Video

RGB

HDMI

Turning on the Projector

1. Make sure the power cord is connected correctly.

2. Plug in the power cord and wait for a while before pressing the

POWER button on the control panel or the remote

control. (The light on the control panel will be turned on.)

• Press the

INPUT button on the remote control or the INPUT button on the control panel to select the input signal you want.

• When you press the

POWER button on the remote control or the POWER button on the control panel when you turn on the

projector, the lights for all buttons on the control panel will be turned on.

Turning off the Projector

Press the

POWER button on the top cover or the POWER button on the remote control.

When an image appears on the screen, check if it is in focus and fits the screen properly.

• To adjust the focus of the image, rotate the focus ring.

Focus ring

Focus and Position of the Screen Image