LG BD550 - Manual (Page 85)

85 Appendix
Appendix
7
Video Output
Resolution
HDMI OUT connection
• If you select a resolution manually and then
connect the HDMI jack to TV and your TV
does not accept it, the resolution setting is
set to [Auto].
• If you select a resolution that your TV
does not accept, the warning message
will appear. After resolution change,
if you cannot see the screen, please
wait 20 seconds and the resolution will
automatically revert back to the previous
resolution.
• The 1080p video output frame rate may
be automatically set to either 24 Hz or
60 Hz depending both on the capability
and preference of the connected TV and
based on the native video frame rate of the
content on the BD-ROM disc.
COMPONENT VIDEO OUT
Connection
BD, DVD, Netfl ix or CinemaNow video stream
could prevent up-scaling on analog output.
VIDEO OUT connection
The resolution of the VIDEO OUT jack is always
outputted at 480i resolution.
When the non-copy protected media is playing back
Video Out
Resolution
HDMI OUT
COMPONENT VIDEO OUT
HDMI connected HDMI disconnected
480i 480p 480i
480p 480p 480p
720p 720p 720p
1080i 1080i 1080i
1080p/24 Hz 1080p / 24 Hz 480i 1080i
1080p / 60 Hz 1080p / 60 Hz 480i 1080i
When the copy protected media is playing back
Video Out
Resolution
HDMI OUT
COMPONENT VIDEO OUT
HDMI connected HDMI disconnected
480i 480p 480i
480p 480p 480p
720p 720p 480i 480p
1080i 1080i 480i 480p
1080p/24 Hz 1080p / 24 Hz 480i 480p
1080p / 60 Hz 1080p / 60 Hz 480i 480p
BD561-N-BUSALLK-ENG.indd 85 BD561-N-BUSALLK-ENG.indd 85 10. 10. 20 11:18 10. 10. 20 11:18