American Audio CDS-1 - Manual (Page 14)

BASIC OPERATIONS (CONT.)
8. SCANNING (FAST FORWARD / FAST REVERSE)
This function gives you a fast search through a disk or track. For
faster scanning speeds hold down either the FORWARD SEARCH/
SCAN BUTTON (13) or the REVERSE SEARCH/SCAN BUTTON (12)
depending on which direction you want to search. You can scan in
3 different forward and 3 different reverse speeds depending on how
long the buttons are held down.
Figure 10
1) ELAPSED (31) - This details the time in the LCD (36, 37, & 38) as the
current tracks’ elapsed running time. The elapsed function only details a
tracks elapsed time and not the entire disc.
2)
REMAIN (33) - This details the time in the LCD (36, 37, & 38) as the cur-
rent tracks’ remaining running time.
3)
TOTAL REMAIN (32) - This details the time in the LCD (36, 37, & 38) as
the total disc remaining time.
TIME BAR INDICATOR - The time bar in the LCD visually details the time
defined in the TIME METER (36, 37, & 38). This bar is also dependent on
the selected time function (TOTAL REMAIN (32), REMAIN (33) or ELAPSE
(31).
This bar will begin to flash when 15 seconds of a track remain
and will begin to rapidly flash when three seconds of a track remain.
The flashing bar is a great visual reminder a track is about to end.
The flashing bar will function regardless of which time mode the unit
is in.
Figure 11
© American Audio ® - www.AmericanAudio.us - CDS-1™ Instruction Manual Page 14
9. CHANGING THE TIME DISPLAY (31, 32, & 33)/TIME BAR (30):
The time may be displayed in three different modes; Elapsed, Remain, and Total Remain. During normal play-
back, pressing the TIME BUTTON (17) as in figure 11, will change the time display information (31, 32, 33, &
30) in the LCD. The following is a break down of the time settings and their definitions: