Acnodes FPC-8057 - Manual (Page 41)

server, please consult with
MIS to get specific IP address.
Click “Start/Settings/Control
Panel”. Double click “Network
and Dial-up Connections” and
update
___ the IP address. _______________________________________
6 Use the cecp utility “Save
registry” to save this
changed.
The FPC-8057 can use the USB client to USB host cable connect the
USB client port of the FPC-8057 and the USB host port of the host
computer as following:
Step
1 Make sure the
Microsoft ActiveSync
service is properly
installed on the host
PC.
Microsoft
ActiveSync
2 Power ON the
FPC-8057.
Before the Windows
CE.NET boot up, don’t
connect the USB
cable.
32 Windows CE.NET