LG LGVX4500 - Manual (Page 46)

89 VX4500 88 VX4500
Key Tone (Menu )
Allows you to set the Key Tone length and touch tone playback
speed.
1. Press Left Soft Key Menu.
2. Press Settings.
3. Press Sounds then press Key Tone.
4. Select either of the following then press .
Normal Sends out a tone for a fixed period of time even
if you keep the key pressed.
Long Sends out a continuous tone for as long as you
keep the key pressed.
Volume (Menu )
Allows you to set various volume settings.
1. Press Left Soft Key Menu.
2. Press Settings.
3. Press Sounds then press Volume.
4. Select Ringer / Earpiece / Key Beep / Speaker.
5. Adjust the volume of the ringer with then press
to save the setting.
NOTE: Dual-Tone Multi Frequency (DTMF) Signaling by the
simultaneous transmission of two tones, one from a group
of low frequencies and another from a group of high
frequencies. Each group of frequencies consists of four
frequencies. Setting the Key Beep length to Long will extend
the DTMF tone.
Using Phone Menus Using Phone Menus
Settings (Menu )
The Setup menu has options to customize your phone.
Access and Options
1. Press Left Soft Key Menu.
2. Press Settings.
3. Select a sub-menu.
● Sounds
● Display
● System
● Security
● Call Setup
● 1x Data
● Location
● Phone Info
Sounds (Menu )
Options to customize the phone’s sounds.
Ringers (Menu )
Sets ring tones for types of incoming calls.
1. Press Left Soft Key Menu.
2. Press Settings.
3. Press Sounds then press Ringers.
4. Select Caller ID / No Caller ID / Restrict.
5. Use to select a ringer then press to save the sound.
VX4500-(E)Small (1.3).QXD 8/17/04 5:08 PM Page 88