LG LGP930 - Manual (Page 66)

66
System settings
1 Connect your phone to your computer with
a USB cable.
2 The USB connection type prompt is
displayed. Tap USB tethering to confirm.
n
NOTE
- Data Tethering requires an appropriate
DataPro data plan. Devices connected by
tethering use data from your DataPro plan.
Plans are not unlimited and significant
charges may be incurred if the included
data allowance is exceeded. Performance
may vary depending on the number of
devices connected and other factors.
- You cannot access your phone's microSD
card on your computer when using USB
tethering.
DEVICE
Sound
Adjust sound, notification default settings and
vibrate mode. You can also manage audible
and Haptic feedback.
Sound profile - Allows you to set the sound
profile to Sound, Vibrate only, or Silent.
Volumes - Adjust the phone's volume settings
to suit your needs and your environment.
Phone ringtone - Select the ringtone for
incoming calls.
Notification sound - Select the ringtone for
notifications such as new messages receipt or
calendar events.
Ringtone with vibration - Checkmark for
vibration feedback for calls and notifications.
Quiet time - Slide the button to set times to
turn off all sounds except alarm and media.
Dial pad touch tones - Select whether to
hear tones when you use the dialpad.
Touch sounds - Select whether to hear
sound when you tap buttons, icons, and other
onscreen items.
Screen lock sounds - Select whether to hear
sound when the screen is locked or unlocked.
Vibrate on touch - Select whether to vibrate
when touching buttons and keys.
Display
Brightness - Adjust the brightness of the
screen.
Auto-rotate screen - Set to switch
orientation automatically when you rotate
the phone.
Screen timeout - Set the time delay before
the screen automatically turns off.