LG PA77U - Manual (Page 24)

24 MAGIC REMOTE CONTROL
MAGIC REMOTE CONTROL
If the battery low message appears while using the
projector, replace the batteries.
As shown in the figure, press the top of the battery cover
and slide it down the cover. Insert two new and identical
batteries (1.5 V, AA type) with + and - poles pointing in the
correct direction in the remote control.
CAUTION
y Do not mix new batteries with old ones.
FK YRO
EDFN VPDUW
/40(18
(POWER)
Turns the projector on or off.
, , , (Up/Down/Left/Right)
ㄮᗺ ⰶᲳ
ⱞⳮ ➎Ẳ㞢
/Q.MENU
BACK
Press this button during menu selection to return
to the previous step.
SMART
ㄮᗺ ⰶᲳ
ⱞⳮ ➎Ẳ㞢
/Q.MENU
Displays the Home menu.
Wheel (OK)
Select a menu or option. If you press the , , ,
or button while the pointer is moving, the pointer
disappears and the magic remote control operates
as a normal remote control.
To display the pointer on the screen, shake the
magic remote control to the left/right.
(Voice recognition)
Check the network connection before using the
voice recognition function.
1. Press the voice recognition button.
2. Speak your request when the voice display bar
on the left of the projector screen is activated.
Use the magic remote control no further than
10 cm (3.9 inches) from your face. The voice
search may fail if you speak too quickly or
too slowly. The recognition rate may vary
depending on the user's characteristics (voice
volume, pronunciation, intonation, and speed)
and the environment (noise and projector
volume).
Pointer Signal Transmitter