Accton Technology SWITCHUB-2S 100BASE-TX User Manual
Page 30
SwitcHub-2s User’s Guide
3-6
Hardware Installation
Selections Available
This section shows the information available for each display mode and the
corresponding LED indicators. The display functions are listed here in the
sequence selected by the configure button. For a more detailed description of
these indicators, refer to Chapter 2.
Bandwidth Utilization
Active LED:
Util%
(ON)
In this mode, the statistical indicators show the percentage of valid data
handled by each port on the hub compared to available bandwidth.
Packet Forwarding Ratio
Active LED:
Forward%
(ON)
In this mode, the statistical indicators show the percentage of packets that must
be forwarded by bridging hardware to the other port on the switching hub.
Packet Filtering Ratio
Active LED:
Filter%
(ON)
In this mode, the statistical indicators show the percentage of packets that must
be filtered from the switching hub by bridging hardware because the destination
address is on the segment connected to the receiving port (i.e., in the same
segment with the source address).
Collision Ratio
Active LED:
Coll%
(ON)
In this mode, the statistical indicators show the percentage of packet collisions
occurring out of the total packets transmitted by the respective port.