ADC GSM Base Station Controller UltraWAVE BSC - Manual (Page 2)

6/08
•
106414AE
UltraW
A
VE
BTS
UltraWAVE BTS
GSM Base Station Controller
2 w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
Features:
Supports GSM 850, GSM 900, DCS 1800, and PCS 1900 networks •
General Packet Radio Service (GPRS) •
Easy capacity expansion: modular design, field upgradeable •
Common hardware modules: ICP processor, E1 or T1, E1 or T1 with TRAU •
Dual processor redundancy •
Redundant power supply that supports PSU failure alarm •
110/220 VAC, and -48 VDC power supply •
Versatile mounting options for 19", 23" or 24" racks •
Supports Enhanced Full Rate (EFR) and Full Rate speech coding •
A5/0, A5/1 encryption •
SMS and SMS cell broadcast •
Dynamic power control •
Automatic BCCH reassignment •
The UltraWAVE BSC is ADC’s high capacity Base Station Controller that aggregates and manages the
communications between the BTS and the GSM switching center. The UltraWAVE BSC supports up to
84 TRXs, depending upon the network requirements. Based upon its compact and cost-effective design,
the UltraWAVE BSC lowers network costs while increasing service quality within any GSM, DCS, or PCS
digital wireless network. It offers the operators a more economical and easily manageable growth path.
The majority of the operators can start with a BSC configured for the initial capacity and add more trunk
cards to grow the network as needed. ADC’s UltraWAVE BSC supports the ETSI GSM standard and its
DCS/PCS derivatives.
The UltraWAVE BSC uses a standard compliant GSM A-interface which is tested to inter-operate with
MSCs of all major GSM vendors.